Peugeot Parking Sensors

Peugeot Parking Sensors


Peugeot 107

Peugeot 207 CC

Peugeot 207 SW

Peugeot 307 SW

Peugeot 307SW

Peugeot 508

Peugeot 5008

Peugeot Boxer Van


Peugeot Fitted With Dolphin Parking Sensors

Peugeot 107, 2011 model with micro matt black sensors fitted in the matt black bumper trim but Dennis though our installation service.








Peugeot 207 CC With Dolphin Parking Sensors

Peugeot 207 CC with our matt black parking sensors fitted in the matt black bumper strip on the rear of the vehicle in the same positions as original factory fit sensors.

Peugeot 207 CC with parking sensors


close up of sensors in bumper


full length of bumper




Dolphin Parking Sensors For Peugeot 207

This Peugeot 207 SW has the DMS micro parking sensors in matt black fitted in the rear bumper. The customer went for the DMS450 with the dash mounted display but decided to have it fitted on top of the rear view mirror. Normally there would be a piece of cable showing going to the roof lining but some tubing has been put around the wire in this case to make it look more professional.

59 reg Peugeot 207 SW with parking sensors


matt black sensors blend in well with the bumper

zoomed in



Dolphin Display Fitted to Peugeot 307 SW

Home fitting done and commentated by Mark Robins on his Peugeot 307 SW.


before picture of peugeot 307


starting time


Quick glance at the instructions


dolphin parking sensors box


Good match


Good match for the coloured bumper


Masking tape

Masking taping the whole area


Find the middle


locating the middle point in the bumper


A few well thought out measurements


Measuring carefully the best sparing arrangement for the car


Found the clearance underneath bumper for sensors to go through and marked


working out where the spaces are behind the bumper was a big part of this


Cleaned mirror and stuck it on


stuck the display on top of the rear view mirror


Tucked wiring in roof lining for a tidy job


tucking wires in to roof lining


Wiring in rear roof lining 


wiring to rear


Display lead ready for control box


display lead for control box


Rear lamp removed


rear lamp removed


Soldered and shrink tube for a tidy job (green = live…. and yellow green = earth)


all souldered


Hole ready for sensor wiring with rubber gromet 


Hole ready for sensor wiring


Sensor leads made into a loom taking out the slack for a tidy job at the control unit


made in to a loom taking out slack


Ready for the rear light to go on 


ready for rear light to go back on


Sensor leads ready and gromet fitted


sensor leads ready


Wiring in ready to go


wires ready


All done with the wiring, control box mounted


control box mounted


Switch fitted in case I need to turn the system off


fitted switch incase need to turn system off


Finished 


Finish time


Looking good…………….. 


Finished rear of car


Working…………..Lets see how good it is??


working lets see how good it is





Peugeot 307SW With Dolphin Parking Sensors

Peugeot 307SW with reversing sensors kitted by Colin of SmartTech Kent

Peugeot 307 SW 307SW





Dolphin Audio Fitted to Peugeot 508

Peugeot 508 fitted with Matt Black sensors sprayed with exact colour match paint.

Peugeot 508 with parking sensors installed





Peugeot 5008 With Dolphin Parking Sensors

This is a Peugeot 5008 with Ice Blue sensors fitted by Colin, part of our mobile installer network.

Peugeot 5008 with sensors installed





Peugeot Boxer Installation


This is a Peugeot Boxer that has been adapted in to a motor home.  Obviously to accomplish this transformation it has undergone the addition of lots of features.  As you can see our installer has also fitted a specialist OEM style reversing camera to make reversing simple for the owner.  You really wouldn't know that that wasn't part of the original Peugeot Boxer van!


Peugeot Boxer Van Motor home conversion


OEM style reversing camera mounted to see rear of van


close up of the reversing camera on Peugeot Boxer