Product Categories

4 Self Adhesive Sensors, Gloss Black With Audio & Roof Display


DAS455SBLK
0 product stars
£59.99 inc. tax

£49.99 ex. tax
? Tax based on United Kingdom.

4 Self Adhesive Sensors, Gloss Black With Audio & Roof Display Summary

Stick on adhesive sensors in silver and black
If you are looking for an easy DIY parking sensor system then these adhesive sensors maybe just what you are looking for. These sensors stick onto the rear of the car so you do not need to drill holes in the bumper, but they work just the same as traditional ultrasonic sensors. These adhesive parking sensors are available in Black or Silver. We recommend fitting them on the bumper or rear light cluster near where the boot opening is so you can tuck the wires into the car close to where you mount the sensors. These are then just a 2 wire connection to the white reversing light for power and to the chassis of the vehicle to earth the system. The brain box and a loud audio buzzer both mount in the boot. 

Kit Contents

  • 4 Adhesive Sensors
  • 1 Control Unit
  • Rear Mounting Display Unit
  • Fitting Accessories
  • Instruction Manual


How it works

The system

Stage
Distance
Awareness
Alarm
1
200 - 160cm
Safe Mode
No
2
150 - 100cm
Safe Mode
Bi----Bi----Bi
3
90 - 50cm
Alarm Mode
Bi--Bi--Bi
4
40 - 30cm
Danger Mode
Bi-Bi-B
5
30 - 0cm
Stop
Bi----------

 

Technical Specification

  • Rated voltage (range) DC12V
  • Power 3.6W
  • Detecting Angle H>60, V>60 degreese
  • Detection Distance 0.3~2m
  • Sensor Frequency 315MHz/433MHz
  • Working temperature of control box -20 ~+70
Some Useful Measurement Information
(measurements are approximate and not guaranteed)
Component Length x Width x Depth
Size of Buzzer

59mm x 40mm x 17mm

Size of Processor
96mm x 68mm x 26mm
Size of Ultrasonic Adhesive Sensors
30mm x 40mm x 18mm
Length of Sensors Cabling
2m
Length of Cabling for Buzzer
2m

Maintenance

No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. Clean carefully with a soft cloth. Do not use chemicals or spirits. Applying hot water in frozen conditions may damage the sensors. The sensors can be washed carefully with warm soapy water.
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
2 Adhesive Sensors Glos..
2 Adhesive Sensors Glos..
If you are looking for an easy DIY parking sensor system then these adhesive sensors maybe just what you are looking for. These sensors stick onto the...
£29.99
2 Adhesive Sensors Glos..
2 Adhesive Sensors Glos..
If you are looking for an easy DIY parking sensor system then these adhesive sensors maybe just what you are looking for. These sensors stick onto the...
£39.95
4 Adhesive Sensors Glos..
4 Adhesive Sensors Glos..
If you are looking for an easy DIY parking sensor system then these adhesive sensors maybe just what you are looking for. These sensors stick onto the...
£49.99
Self Adhesive 4 x Senso..
Self Adhesive 4 x Senso..
If you are looking for an easy DIY parking sensors then these adhesive sensors maybe just what you are looking for. These sensors stick onto the rear of...
£59.99
Customer Reviews
No Reviews Posted Yet - be the first!(write review)
Product Added to your Cart
x

-------- OR --------